Before you start!

Ensure that you are not installing your decals in direct sunlight, it is recommend to install them in shade or in a garage and also do not store your decals in direct sunlight.

​

Materials you will need!

• Installation Squeegee (found in most hardware stores) ​

• Fluid to apply the decal with (in a spray bottle)

• Glass cleaner 

• Paper towels

• Ruler/Measuring Tape

​

Preparation

Ensure that you have removed any dirt, grease and/or wax from the surface that you are applying the decal to; this also applies to anything else that could be on the surface; ensure it is removed. If you do not take these precautions, your decal will not stick or adhere to the surface! 

​

Applying the Decal

1. Please ensure you check your decals first for any damage during transit or shipping. If there is any damage, we kindly ask that you take photos and get back in touch with us within two working days from the day the order arrived with you. Using a squeegee, we request that you press firmly over the decal on a flat surface to make sure that the decal is stuck firmly to the transfer tape. You can then go ahead and peel the backing off to reveal the sticker on the transfer tape. 

DO NOT LET THE STICKY SECTION OF THE DECAL TOUCH ANYTHING

You should use a form of application spray to make the process of applying the decal easier for yourself.

2. Proceed to place the decal on the wet surface, due to the application spray, but make sure you have placed the sticky side of the transfer tape down onto the surface. Due to the wetness of the surface, you can play around with the decal and measure it up to how you want it to be placed. 

3. Once placed how you wish for it to be placed, you can go ahead and rub over the tape and decal firmly using the squeegee until you feel it is pressed down onto the surface firmly enough. 

4. Finally, gently remove the transfer tape, being careful to check that the decal has transferred fully and is not still stuck to the tape.