Mountune Motorsport Custom Made Decals x4 1.979cm x 10.015cm
Mountune Motorsport Custom-Made Decals x4
Size Of Decal Approx 1.979cm x 10.015cm
Will fit any Ford, VW Audi, Skoda, Seat,
IF YOU WISH TO HAVE THESE DECALS IN A RARE COLOUR, SUCH AS NEON, THEN PLEASE DO CONTACT US BEFORE PURCHASING SO WE CAN MAKE SURE WE HAVE THE VINYL IN STOCK OR WE CAN PURCHASE THE VINYL IN A TIME FRAME SUITABLE FOR YOU.
These are high-quality Vinyl Stickers; they are perfect for that special touch to your front bumper.if you would like this in a different colour, please contact us after purchase
Otherwise, you will receive a gloss Yellow set
We recommend that you consult your local sign-making fitting company, but you can install these graphics yourself. If unsure of your fitting capabilities, we recommend that you watch YouTube fitting guides. When applying your vinyl graphics, ensure the surface is clean and free from dust or grease. Graphics are suitable for dry or wet application methods. We cannot be held responsible for incorrectly or badly installed products. I.e trapped air bubbles, or ripping of the vinyl if you do not take your time when installing your product. Application Instructions For Decals
Follow These 7 Easy Steps
1. Place design face up on a flat surface and, with the plastic card, rub over the graphic, ensuring the entire graphic has adhered to the application tape.
2. Turn over the graphic face down and begin to peel away the backing paper slowly, ensuring the graphic is stuck to the application tape. Carefully replace wax paper and refer to step 1 if the graphic is still stuck to the wax paper.
3. With the wax paper now removed, ensure the application surface is clean and dry before continuing. A generic glass cleaning spray will do the job well; wipe clean and dry with a lint-free cloth.
4. Carefully line up your graphic onto your chosen location, ensuring no pressure is applied to the graphic itself until you are happy. For large graphics, it is recommended that the chosen location is marked out before application.
5. Using the plastic card, apply pressure to the graphic starting from the middle and work outwards, smoothing out any creases or air bubbles as you go.
6. Starting at one corner, gently pull away the application tape at 180 degrees to the graphic, ensuring the graphic has stuck; if not, replace the application tape and rub over until it adheres. 7. Finally, check your graphic for any air bubbles present; if there are, use a pin or a needle and gently prick the bubble and apply light pressure to remove it.
***Buyers outside of the United Kingdom***
Please note that this item MAY incur additional customs charges
when imported into your country
Any import charges are to be paid by the buyer and are not the responsibility of North West Vinyl Graphics
❤️ RETURN POLICY: Any returns or refunds must be mentioned to us on the day of delivery so we can get the product back to us and replace it or refund it immediately. All refunds will be paid when the product arrives back to us. If damaged, we will need picture evidence sent to us via email as proof before we refund or replace the item.
Tracked 48 Shipping UK.
World Wide Postage Starting From £4.20.
Thanks For Looking :)